Kenmore HE3 Steam 110-86762 Dryer Manual

The Kenmore HE3 Steam 110-86762 Dryer is designed to provide efficient drying with advanced steam technology, ensuring your clothes come out fresh and wrinkle-free. This dryer features multiple drying cycles, a large capacity drum, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Using Steam Function 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple drying cycles, steam technology, energy-efficient settings.

Feature	Description
Steam Technology	Reduces wrinkles and refreshes clothes.
Multiple Drying Cycles	Options for different fabric types and drying needs.
Energy Saver Mode	Reduces energy consumption while drying.
Lint Filter	Easy access for cleaning to maintain efficiency.
End-of-Cycle Signal	Alerts when drying is complete.

Installation

Unpack and inspect contents. Ensure proper venting and electrical connections.

Choose a location with adequate space and ventilation.
Connect to a power source: Ensure the dryer is plugged into a suitable outlet.
Install venting: Connect the vent hose to the back of the dryer and secure it.
Level the dryer: Adjust the feet to ensure the dryer is stable.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer; follow on-screen prompts for initial settings.

Select language and preferences on the control panel.
Run a test cycle to ensure proper operation.
Adjust settings for optimal drying based on fabric types.

CAUTION! Ensure the dryer is properly installed before use.

Specifications

Model: Kenmore HE3 Steam 110-86762.
Capacity: 7.0 cu. ft.
Power Source: 240V, 30A.
Drying Cycles: 12 preset cycles.
Steam Options: Yes, for wrinkle reduction.
Dimensions: 27" W x 30" D x 38" H.
Weight: 120 lbs.

Controls and Settings

Access drying options via the control panel. Features include cycle selection, temperature settings, and steam options.

Control Panel: Start/Stop, Cycle Selector, Temperature Control, Steam Option.

Connecting Power

Ensure the dryer is connected to a dedicated electrical outlet.

Turn off power before connecting.
Use a 240V outlet with a 30A circuit.
Check for proper grounding.

Tip: Consult a professional electrician if unsure about connections.

Using Steam Function

The steam function helps reduce wrinkles and refresh clothes.

Select a cycle with steam option.
Load the dryer and start the cycle.
Monitor the drying process; the steam will activate during the cycle.

WARNING! Do not overload the dryer to ensure effective steam operation.

Maintenance

Regular maintenance ensures optimal performance.

Clean the lint filter after every use.
Inspect venting for blockages regularly.
Schedule professional maintenance annually.

Care & Cleaning

Unplug before cleaning. Use a damp cloth for exterior surfaces.

CAUTION! Avoid using harsh chemicals or abrasive materials.

Regulatory Information

This dryer complies with all applicable safety standards and regulations. For support, visit www.kenmore.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power cord and outlet.
No heat	Heating element failure	Inspect and replace if necessary.
Wrinkles remain	Overloading	Reduce load size for better results.
Dryer making noise	Foreign object in drum	Inspect drum and remove any objects.
Steam not working	Water reservoir empty	Refill water reservoir for steam function.

Reset: Refer to the control panel for reset options if available.

Service: For assistance, contact 1-800-4-KENMORE or visit www.kenmore.com.