Kenmore HE 4 Electric Dryer 110-8508 Dryer Manual

The Kenmore HE 4 Electric Dryer 110-8508 is designed for efficient drying with advanced features such as moisture sensing technology, multiple drying cycles, and energy-saving options. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. Operating Instructions 4. Specifications 5. Maintenance and Care 6. Troubleshooting

Features at a Glance

Key features include moisture sensing technology, multiple drying cycles, and a large capacity drum for efficient drying.

Feature	Description
Moisture Sensor	Automatically adjusts drying time based on moisture levels.
Multiple Drying Cycles	Various settings for different fabric types.
Energy Saver	Reduces energy consumption during operation.
Lint Filter	Easy to clean for optimal performance.
Drum Light	Illuminates the drum for easy loading and unloading.

Installation

Ensure proper installation for optimal performance. Follow the steps below:

Choose a suitable location with adequate ventilation.
Connect the dryer to a dedicated electrical outlet.
Ensure the venting system is properly installed to prevent lint buildup.
Level the dryer using adjustable legs.

WARNING! Improper installation may result in fire hazards. Follow all safety guidelines.

Operating Instructions

To operate the dryer, follow these steps:

Load the dryer with wet clothes, ensuring not to overload.
Select the desired drying cycle based on fabric type.
Press the start button to begin the drying process.
Monitor the drying progress through the display panel.

CAUTION! Do not leave the dryer unattended while in operation.

Specifications

Model: Kenmore HE 4 Electric Dryer 110-8508.
Power Supply: 240V, 30A.
Capacity: 7.0 cu. ft.
Dimensions: 27" W x 30" D x 43" H.
Weight: 120 lbs.
Drying Cycles: 10 different cycles available.
Warranty: 1-year limited warranty.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Clean the lint filter after each use.
Inspect and clean the venting system periodically.
Check for any signs of wear or damage.

CAUTION! Always unplug the dryer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check electrical connections and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Clothes not drying	Blocked vent	Clean venting system and lint filter.
Excessive noise	Foreign object in drum	Check drum for any objects and remove.

Reset: If issues persist, reset the dryer by unplugging it for 5 minutes.

Service: For further assistance, contact customer service at 1-800-4-KENMORE.