Kenmore Elite 110-9586 Series Dryer Manual

The Kenmore Elite 110-9586 Series Dryer is designed for efficient drying of your laundry with advanced features such as moisture sensing technology, multiple drying cycles, and energy-saving options. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key features include: Moisture sensing technology, multiple drying cycles, energy-efficient operation, and a large capacity drum.

Feature	Description
Moisture Sensor	Automatically adjusts drying time based on moisture levels.
Multiple Drying Cycles	Options for various fabric types and drying needs.
Energy Saver	Reduces energy consumption while maintaining performance.
Large Capacity Drum	Accommodates large loads for fewer drying cycles.
Lint Filter	Easy to clean for optimal performance.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Choose a location with adequate ventilation.
Connect to a power source as per local codes.
Ensure the dryer is level for proper operation.
Check all connections for leaks and secure fittings.

WARNING! Improper installation can lead to hazards. Follow all safety instructions.

First-Time Setup

Power on the dryer and set the desired drying cycle.

Load the dryer with laundry, ensuring not to overload.
Select the appropriate drying cycle based on fabric type.
Press the start button to begin the drying process.

CAUTION! Do not leave the dryer unattended while in operation.

Specifications

Model: Kenmore Elite 110-9586.
Type: Electric Dryer.
Capacity: 7.0 cu. ft.
Power Supply: 240V, 30A.
Dimensions: 27" W x 29" D x 43" H.
Weight: 120 lbs.
Drying Cycles: 10 different settings.
Energy Efficiency: Energy Star certified.

Controls and Settings

Access controls via the front panel. Features include cycle selection, temperature settings, and start/pause functions.

Control Panel: Easy-to-read display with intuitive buttons for cycle selection and adjustments.

Connecting Power

Ensure the dryer is connected to a dedicated power outlet.

Turn off the power supply before connecting.
Use a 4-prong power cord for safety.
Securely connect the power cord to the dryer and outlet.

Tip: Always check the power supply before use.

Operating the Dryer

Follow these steps to operate the dryer effectively:

Load laundry and close the door securely.
Select the desired drying cycle and options.
Press the start button to begin drying.
Monitor the drying process and adjust settings if necessary.

WARNING! Do not open the door while the dryer is in operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Inspect and clean the venting system periodically.
Check for any signs of wear or damage.

CAUTION! Unplug the dryer before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power cord and outlet.
No heat	Heating element failure	Inspect and replace heating element.
Clothes not drying	Blocked vent	Clean lint filter and venting system.
Excessive noise	Loose parts	Inspect for loose screws or components.

Reset: Unplug for 5 minutes to reset the dryer.

Service: For assistance, contact 1-800-4-MY-HOME or visit www.kenmore.com.