Kenmore ELITE SENSOR SMART Dryer Manual

The Kenmore ELITE SENSOR SMART Dryer is designed to provide efficient drying with advanced sensor technology. It features multiple drying cycles, steam options, and a user-friendly interface for optimal performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Sensor drying technology, multiple drying cycles, steam refresh option, energy-saving mode, and a large capacity drum.

Feature	Description
Sensor Drying	Automatically adjusts drying time based on moisture levels
Steam Refresh	Reduces wrinkles and refreshes clothes
Energy Saver	Optimizes energy usage for cost savings
Large Capacity	Accommodates large loads for efficiency
Smart Technology	Connects to Wi-Fi for remote monitoring and control

Installation

Unpack and inspect contents. Ensure proper ventilation and level installation.

Connect to power source: Ensure outlet is compatible and grounded.
Ventilation: Use appropriate ducting for exhaust.
Level the dryer: Adjust feet for stability.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer; follow on-screen prompts to set preferences.

Select drying cycle: Choose based on fabric type.
Adjust settings: Modify temperature and drying time as needed.
For steam option: Ensure water reservoir is filled.

CAUTION! Follow safety instructions during setup.

Specifications

Model: Kenmore ELITE SENSOR SMART Dryer.
Capacity: 7.4 cu. ft.
Power Supply: 240V, 30A.
Drying Cycles: 12 preset cycles.
Steam Function: Yes, with refresh option.
Dimensions: 27" W x 30" D x 38" H.
Weight: 120 lbs.

Controls and Settings

Access settings via the digital display. Controls include cycle selection, temperature adjustment, and steam options.

Smart Features: Connect to the Kenmore app for remote control and notifications.

Connecting Power

Ensure the dryer is connected to a dedicated power outlet.

Turn off the power before connecting.
Use a 4-prong or 3-prong power cord as required.
Securely connect to the outlet.

Tip: Check local codes for electrical requirements.

Operating the Dryer

Follow the selected cycle instructions for optimal results.

Load clothes evenly in the drum.
Select desired cycle and options.
Press start to begin drying.

WARNING! Do not overload the dryer; it may affect performance.

Maintenance and Care

Regularly clean the lint filter and check venting for blockages.

CAUTION! Unplug before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check outlet and power cord.
No heat	Heating element failure	Inspect and replace if necessary.
Long drying times	Blocked vent	Clean lint filter and venting.
Unusual noises	Foreign objects	Check drum for items.

Reset: Unplug for 5 minutes to reset the control board.