Kenmore C8817 Series Dryer Manual

The Kenmore C8817 Series Dryer is designed for efficient drying of clothes with various settings for different fabric types. It features multiple drying cycles, a moisture sensor, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multiple drying cycles, moisture sensor, energy-saving options, lint filter, and adjustable drying temperature.

Feature	Description
Moisture Sensor	Automatically detects moisture levels to prevent over-drying.
Multiple Drying Cycles	Options for different fabric types and drying needs.
Energy Saver	Reduces energy consumption while maintaining performance.
Lint Filter	Traps lint and debris for efficient operation.
Adjustable Temperature	Allows selection of drying temperature based on fabric type.

Installation

Unpack and inspect contents. Ensure proper ventilation and level placement.

Connect to power supply: Ensure voltage matches specifications.
Install venting: Use proper ducting for venting hot air outside.
Level the dryer: Adjust feet to ensure stability.

WARNING! Ensure proper installation to avoid hazards.

First-Time Setup

Power on the dryer; select desired settings based on fabric type.

Set drying cycle: Choose from available options.
Adjust temperature: Select based on fabric care labels.
Start the dryer: Press the start button to begin the cycle.

CAUTION! Do not overload the dryer for optimal performance.

Specifications

Model: Kenmore C8817 Series.
Drying Capacity: 7.0 cu. ft.
Power Supply: 240V, 30A.
Dimensions: 27" W x 29" D x 43" H.
Weight: 120 lbs.
Drying Cycles: 10 different cycles.
Warranty: 1 year limited warranty.

Controls and Settings

Access settings via the control panel. Features include cycle selection, temperature adjustment, and start/pause functions.

Control Panel: Cycle selector, temperature dial, start/pause button, and indicator lights.

Connecting Power

Ensure proper electrical connection before use.

Check voltage requirements.
Use a dedicated circuit for the dryer.
Ensure all connections are secure.

Tip: Consult a professional electrician if unsure about connections.

Operating the Dryer

Follow the instructions for optimal drying performance.

Load clothes evenly in the drum.
Select the appropriate cycle and temperature.
Press start and monitor the drying process.

WARNING! Do not leave the dryer unattended during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Inspect venting for blockages regularly.
Schedule professional maintenance annually.

CAUTION! Unplug the dryer before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power connection and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Clothes not drying	Blocked vent	Clean venting system and lint filter.
Excessive noise	Loose parts	Inspect for loose components and tighten as needed.

Reset: Unplug for 5 minutes to reset the control board.