Kenmore 97812 Dryer Manual

The Kenmore 97812 is a high-efficiency dryer designed to provide optimal drying performance for your laundry. It features multiple drying cycles, moisture sensing technology, and a large capacity drum to accommodate various load sizes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, moisture sensor, multiple drying cycles, energy-saving options, and a user-friendly control panel.

Feature	Description
Moisture Sensor	Automatically detects moisture levels to prevent over-drying.
Multiple Drying Cycles	Offers various settings for different fabric types.
Energy Saver Mode	Reduces energy consumption while maintaining drying efficiency.
Large Capacity Drum	Accommodates large loads for fewer drying cycles.
Lint Filter	Easy to clean for optimal performance.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Choose a suitable location with adequate ventilation.
Connect the dryer to a power source using the appropriate outlet.
Ensure the venting system is properly installed to prevent lint buildup.
Level the dryer to ensure stable operation.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer and follow the on-screen prompts to set preferences.

Select your preferred drying cycle using the control panel.
Adjust settings for temperature and drying time as needed.
Load the dryer and start the cycle.

CAUTION! Do not overload the dryer to ensure efficient drying.

Specifications

Model: Kenmore 97812.
Capacity: 7.0 cu. ft.
Power Supply: 240V, 30A.
Drying Cycles: 12 different cycles.
Dimensions: 27" W x 30" D x 43" H.
Weight: 120 lbs.
Energy Star Certified: Yes.

Controls and Settings

Access the control panel to select drying cycles, adjust settings, and monitor progress.

Control Features: Start/Stop button, cycle selector, temperature settings, and moisture sensor indicator.

Connecting Power

Ensure the dryer is connected to a dedicated power outlet.

Use a 240V outlet for proper operation.
Check the power cord for any damage before connecting.
Ensure the circuit breaker is functioning properly.

Tip: Always unplug the dryer when not in use for safety.

Operating the Dryer

Follow these steps to operate your dryer effectively.

Load the dryer with wet clothes.
Select the desired drying cycle and settings.
Press the Start button to begin the drying process.
Monitor the drying progress on the control panel.

WARNING! Do not leave the dryer unattended while in operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Inspect the venting system for blockages regularly.
Schedule professional maintenance annually.

CAUTION! Unplug the dryer before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power cord and outlet.
No heat	Heating element failure	Inspect and replace heating element.
Clothes not drying	Blocked vent	Clean venting system.
Excessive noise	Loose parts	Inspect and tighten loose components.
Dryer stops mid-cycle	Overheating	Check lint filter and vent for blockages.

Reset: Unplug the dryer for 5 minutes to reset.

Service: For assistance, contact Kenmore customer service.