Kenmore 97271100 Dryer Manual

The Kenmore 97271100 is a high-efficiency dryer designed to provide optimal drying performance for your laundry. It features multiple drying cycles, moisture sensing technology, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Multiple drying cycles, moisture sensor, energy-saving options, and a large capacity drum.

Feature	Description
Moisture Sensor	Automatically adjusts drying time based on moisture levels.
Multiple Drying Cycles	Includes options for delicate, heavy-duty, and timed drying.
Energy Saver	Reduces energy consumption while maintaining drying performance.
Large Capacity Drum	Accommodates large loads for efficient drying.
Lint Filter	Easy to clean for optimal performance.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Choose a location with adequate ventilation.
Connect to a power source as per local codes.
Ensure the dryer is level for proper operation.
Connect the venting system to the back of the dryer.

WARNING! Follow all safety instructions during installation.

First-Time Setup

Power on the dryer and set the desired drying cycle.

Select the drying cycle based on fabric type.
Adjust settings as needed for moisture level and time.
Press the start button to begin drying.

CAUTION! Ensure all connections are secure before use.

Specifications

Model: Kenmore 97271100.
Type: Electric Dryer.
Capacity: 7.0 cu. ft.
Power Source: 240V AC.
Drying Cycles: 10 different cycles.
Dimensions: 27" W x 29" D x 43" H.
Weight: 120 lbs.

Controls and Settings

Access the control panel to select drying cycles and settings. The panel includes buttons for start, stop, and cycle selection.

Settings: Adjust temperature, drying time, and moisture level.

Connecting Power

Ensure the dryer is connected to a dedicated power outlet.

Turn off the power supply before connecting.
Use a 240V outlet for proper operation.
Check connections for any loose wires.

Tip: Consult a professional electrician if unsure about connections.

Operating the Dryer

Follow these steps to operate the dryer effectively:

Load the dryer with wet clothes.
Select the appropriate drying cycle.
Press the start button to begin.
Monitor the drying process and adjust settings if necessary.

WARNING! Do not overload the dryer for optimal performance.

Maintenance

Regular maintenance is essential for optimal performance. Clean the lint filter after every use and check the venting system periodically.

Care & Cleaning

Unplug the dryer before cleaning. Use a damp cloth to clean the exterior and avoid using harsh chemicals.

CAUTION! Do not spray liquids directly on the dryer.

Regulatory Information

This dryer complies with all applicable safety standards and regulations. For support, visit www.kenmore.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power connection and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Clothes not drying	Overloading	Reduce load size and try again.
Strange noises	Foreign objects	Check drum for any items causing noise.

Reset: Unplug for 5 minutes and plug back in to reset.

Service: For assistance, contact 1-800-4-KENMORE or visit www.kenmore.com.