Kenmore 8027 Dryer Manual

The Kenmore 8027 Dryer is a high-efficiency appliance designed to provide optimal drying performance for your laundry. It features multiple drying cycles, temperature settings, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multiple drying cycles, adjustable temperature settings, lint filter, and a digital display for easy operation.

Feature	Description
Multiple Drying Cycles	Choose from various cycles for different fabric types.
Temperature Settings	Adjustable heat levels for optimal drying.
Lint Filter	Easy access for cleaning to maintain efficiency.
Digital Display	Clear interface for monitoring drying progress.
End-of-Cycle Signal	Alerts when drying is complete.

Installation

Unpack and inspect contents. Ensure proper ventilation and a stable surface for installation.

Connect the dryer to a suitable power outlet.
Ensure the venting system is properly installed.
Level the dryer using adjustable legs.
Plug into AC power.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer; follow on-screen prompts to select preferred settings.

Select drying cycle: Use the cycle selector knob.
Set temperature: Adjust using the temperature control.
Start the dryer: Press the start button to begin drying.

CAUTION! Ensure the lint filter is clean before each use.

Specifications

Model: Kenmore 8027.
Drying Capacity: 7.0 cu. ft.
Power Source: 240V AC.
Dimensions: 27" W x 30" D x 43" H.
Weight: 120 lbs.
Drying Cycles: 10 different cycles available.
Warranty: 1-year limited warranty.

Controls and Settings

Access settings via the digital display. Controls include cycle selector, temperature control, and start/pause button.

Additional Features: Delay start, wrinkle guard, and energy saver mode.

Connecting Power

Ensure the dryer is connected to a dedicated power outlet.

Turn off the power supply before connecting.
Use a 30-amp circuit for optimal performance.
Check for proper grounding.

Tip: Consult a professional electrician if unsure about connections.

Operating the Dryer

Follow the instructions for optimal drying results.

Load clothes evenly in the drum.
Select the appropriate drying cycle and temperature.
Press start to begin the drying process.
Monitor the drying progress via the digital display.

WARNING! Do not overload the dryer to prevent damage.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Inspect and clean the venting system periodically.
Check for any blockages in the exhaust duct.

CAUTION! Unplug the dryer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power connection and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Clothes not drying	Blocked vent	Clean lint filter and check venting system.
Excessive noise	Foreign object in drum	Inspect drum for objects and remove.

Reset: Unplug the dryer for 5 minutes to reset.

Service: For assistance, contact 1-800-4-KENMORE or visit www.kenmore.com.