Kenmore 796-9137 Series Dryer Manual

The Kenmore 796-9137 Series Dryer is a high-efficiency appliance designed to provide optimal drying performance for your laundry. This dryer features multiple drying cycles, moisture sensing technology, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power and Venting 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting 10. Warranty Information

Features at a Glance

Key components: Large capacity drum, multiple drying cycles, moisture sensor, energy-efficient operation, and easy-to-use controls.

Feature	Description
Moisture Sensor	Automatically adjusts drying time based on moisture levels.
Multiple Drying Cycles	Options for different fabric types and drying needs.
Energy Saver Mode	Reduces energy consumption while maintaining performance.
Lint Filter	Easy access for cleaning to maintain efficiency.
Reversible Door	Can be adjusted to open from either side for convenience.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Choose a location with adequate ventilation and access to power.
Connect the dryer to a suitable power outlet.
Install the venting system according to local codes.
Level the dryer using adjustable legs.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer and follow the on-screen prompts to set preferences.

Select preferred drying cycle and options.
Adjust settings for fabric types as needed.
Run a test load to ensure proper operation.

CAUTION! Read all instructions before use.

Specifications

Model: Kenmore 796-9137.
Capacity: 7.4 cu. ft.
Power Supply: 240V, 30A.
Dimensions: 27" W x 30" D x 38" H.
Weight: 120 lbs.
Drying Cycles: 10 different cycles available.
Energy Efficiency: Energy Star certified.

Controls and Settings

Access settings via the control panel. Features include cycle selection, temperature adjustment, and start/pause button.

Digital Display: Shows time remaining and cycle status.

Connecting Power and Venting

Ensure proper connections for safe operation.

Connect to a dedicated electrical outlet.
Install venting system to direct moisture outside.
Check for any obstructions in the venting path.

Tip: Regularly inspect venting for lint buildup.

Operating the Dryer

Follow these steps to operate the dryer:

Load the dryer with wet laundry.
Select the desired drying cycle.
Press the start button to begin drying.
Monitor the drying progress on the display.

WARNING! Do not overload the dryer.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Inspect and clean the venting system periodically.
Check for any signs of wear or damage.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power connection and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Excessive noise	Foreign objects in drum	Check and remove any objects.
Clothes not drying	Blocked vent	Inspect venting for blockages.

Service: For assistance, contact Kenmore customer service.