Kenmore 796-8159 series Dryer Manual

The Kenmore 796-8159 series dryer is a high-efficiency appliance designed to provide optimal drying performance for your laundry. It features multiple drying cycles, a large capacity drum, and advanced moisture sensing technology to prevent over-drying. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple drying cycles, moisture sensor, energy-saving options, and a user-friendly control panel.

Feature	Description
Moisture Sensor	Automatically detects moisture levels to optimize drying time.
Multiple Drying Cycles	Includes options for delicate, heavy-duty, and timed drying.
Energy Saver	Reduces energy consumption while maintaining performance.
Lint Filter	Easy to clean for optimal airflow and efficiency.
End-of-Cycle Signal	Alerts when drying cycle is complete.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Choose a location with adequate ventilation.
Connect the dryer to a suitable power source.
Level the dryer using adjustable legs.
Connect the venting system to the back of the dryer.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer and follow the initial setup instructions.

Select your preferred language on the control panel.
Run a test cycle to ensure proper operation.
Adjust settings according to your drying needs.

CAUTION! Read the user manual thoroughly before operating.

Specifications

Model: Kenmore 796-8159.
Capacity: 7.4 cu. ft.
Power Supply: 240V, 30A.
Drying Cycles: 10 different cycles.
Dimensions: 27" W x 30" D x 38" H.
Weight: 120 lbs.
Color Options: White, Metallic.

Controls and Settings

Access drying options via the intuitive control panel. Key controls include:

Start/Pause Button
Cycle Selector Dial
Temperature Settings
Drying Time Adjustment
Delay Start Option

Connecting Power

Ensure the dryer is connected to a dedicated power outlet. Follow these steps:

Turn off the power at the circuit breaker.
Connect the power cord to the dryer.
Plug the dryer into the outlet.
Turn the power back on at the circuit breaker.

Tip: Always check the power requirements before installation.

Operating the Dryer

To operate the dryer:

Load the dryer with laundry.
Select the desired drying cycle.
Press the Start button to begin.
Monitor the drying process via the control panel.

WARNING! Do not overload the dryer to ensure efficient drying.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Clean the lint filter after every use.
Inspect and clean the venting system periodically.
Check for any blockages in the exhaust duct.

CAUTION! Unplug the dryer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power cord and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Long drying times	Blocked vent	Clean lint filter and check venting system.
Unusual noise	Foreign object in drum	Inspect drum for any objects and remove.

Reset: Unplug the dryer for 5 minutes to reset.

Service: For assistance, contact Kenmore customer service.