Kenmore 796-8102 Dryer Manual

The Kenmore 796-8102 is a high-efficiency dryer designed to provide optimal drying performance with various features for convenience and safety. This manual covers essential information regarding safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key features include multiple drying cycles, moisture sensing technology, and a large capacity drum for efficient drying.

Feature	Description
Moisture Sensor	Automatically adjusts drying time based on moisture levels.
Multiple Drying Cycles	Various settings for different fabric types.
Energy Efficient	Designed to save energy while providing optimal performance.
Large Capacity	Can handle large loads, reducing the number of cycles needed.
Lint Filter	Easy to clean for optimal airflow and efficiency.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Choose a location with adequate ventilation.
Connect the dryer to a suitable power source.
Level the dryer to prevent vibrations.
Connect the venting system to the outside.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer and follow the prompts on the display.

Select the desired drying cycle.
Adjust settings as needed for fabric type.
Load the dryer and start the cycle.

CAUTION! Do not overload the dryer for best results.

Specifications

Model: Kenmore 796-8102.
Type: Electric Dryer.
Capacity: 7.4 cu. ft.
Power Supply: 240V, 30A.
Dimensions: 27" W x 30" D x 39" H.
Weight: 120 lbs.
Drying Cycles: 10 different cycles available.
Warranty: 1-year limited warranty.

Controls and Settings

Access settings via the control panel. Features include cycle selection, temperature adjustment, and time settings.

Control Panel: Easy-to-use interface with clear labels for each function.

Connecting Power

Ensure the dryer is connected to a dedicated electrical outlet.

Turn off the power supply before connecting.
Use a 30-amp circuit breaker.
Follow local electrical codes for installation.

Tip: Always consult a professional for electrical connections.

Operating the Dryer

Follow these steps to operate the dryer effectively.

Load clothes into the drum without overloading.
Select the appropriate drying cycle and settings.
Press the start button to begin the drying process.
Monitor the drying progress on the display.

WARNING! Do not leave the dryer unattended while in operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Check and clean the venting system periodically.
Inspect the dryer for any signs of wear or damage.

CAUTION! Unplug the dryer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power connection and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Clothes not drying	Blocked vent	Clean venting system and lint filter.
Excessive noise	Loose parts	Check for loose screws or foreign objects in the drum.

Reset: Unplug for 5 minutes to reset the control board.

Service: For assistance, contact Kenmore customer support.