Kenmore 796-810 Dryer Manual

The Kenmore 796-810 is a high-efficiency dryer designed to provide optimal drying performance with various features including multiple drying cycles, moisture sensing technology, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multiple drying cycles, Moisture sensor, Energy-efficient operation, Large capacity drum, Easy-to-use control panel.

Feature	Description
Moisture Sensor	Automatically detects moisture levels to prevent over-drying.
Multiple Drying Cycles	Offers various settings for different fabric types.
Energy Saver	Reduces energy consumption while maintaining performance.
Large Capacity Drum	Accommodates large loads for fewer drying cycles.
Lint Filter	Removable filter for easy cleaning and maintenance.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Choose a location with adequate ventilation.
Connect the dryer to a suitable power source.
Level the dryer using adjustable legs.
Ensure proper exhaust ducting is installed.

WARNING! Ensure all connections are secure to avoid hazards.

First-Time Setup

Power on the dryer and follow the initial setup instructions.

Select desired language on the control panel.
Run a test cycle to ensure proper operation.
Adjust settings as needed for your laundry preferences.

CAUTION! Ensure the dryer is properly connected before use.

Specifications

Model: Kenmore 796-810.
Capacity: 7.3 cu. ft.
Power Supply: 240V, 30A.
Drying Cycles: 10 different cycles.
Moisture Sensor: Yes.
Dimensions: 27" W x 30" D x 38" H.
Weight: 120 lbs.

Controls and Settings

Access settings via the control panel. Features include:

Control Panel: Start/Stop, Cycle Selector, Temperature Control, Dryness Level.

Settings can be adjusted for different fabric types and drying preferences.

Connecting Power

Ensure the dryer is connected to a dedicated power outlet.

Turn off the power before connecting.
Use a 4-prong power cord for safety.
Check for proper grounding.

Tip: Always consult a professional for electrical connections.

Operating the Dryer

To operate the dryer:

Load the dryer with laundry.
Select the desired drying cycle.
Press the Start button to begin.
Monitor the drying process via the control panel.

WARNING! Do not overload the dryer to ensure efficient drying.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Inspect and clean the exhaust duct regularly.
Schedule professional maintenance annually.

CAUTION! Unplug the dryer before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power cord and outlet.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Long drying times	Blocked vent	Clean lint filter and exhaust duct.
Unusual noises	Foreign objects	Check drum for any items causing noise.

Reset: Unplug the dryer for 5 minutes to reset.

Service: For assistance, contact Kenmore support.