Kenmore 60817 Dryer Manual

The Kenmore 60817 is a high-efficiency dryer designed to provide optimal drying performance for your laundry. It features multiple drying cycles, moisture sensing technology, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multiple drying cycles, moisture sensor, energy-saving options, and a large capacity drum.

Feature	Description
Moisture Sensor	Automatically adjusts drying time based on moisture levels
Multiple Drying Cycles	Includes options for delicate, heavy-duty, and timed drying
Energy Saver Mode	Reduces energy consumption during operation
Large Capacity Drum	Accommodates large loads for efficient drying
Lint Filter	Easy to clean for optimal performance

Installation

Ensure proper installation for optimal performance. Follow these steps:

Choose a location with adequate ventilation.
Connect to a suitable power source.
Ensure the dryer is level for proper operation.
Attach the venting system securely.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer and follow the on-screen prompts to configure settings.

Select preferred drying cycle.
Adjust temperature settings as needed.
Load laundry into the drum and close the door securely.
Press the start button to begin drying.

CAUTION! Do not overload the dryer to ensure effective drying.

Specifications

Model: Kenmore 60817.
Type: Electric Dryer.
Capacity: 7.0 cu. ft.
Power Source: 240V AC.
Drying Cycles: 10 different cycles available.
Dimensions: 27" W x 30" D x 43" H.
Weight: 120 lbs.

Controls and Settings

Access settings via the control panel. Features include cycle selection, temperature adjustment, and start/pause button.

Indicator Lights: Show current cycle status and alerts.

Connecting Power

Ensure the dryer is connected to a dedicated electrical outlet.

Turn off the power supply before connecting.
Use a 30-amp circuit breaker for safety.
Ensure the power cord is properly connected to the dryer.

Tip: Always consult a professional for electrical connections.

Operating the Dryer

Follow these steps to operate the dryer effectively:

Load laundry into the drum.
Select the desired drying cycle and options.
Press the start button to begin.
Monitor the drying process through the indicator lights.

WARNING! Do not leave the dryer unattended while in operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Check and clean the venting system periodically.
Inspect the power cord for damage.

CAUTION! Unplug the dryer before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power connection and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Clothes not drying	Overloading or vent blockage	Reduce load size and check venting system.
Unusual noise	Foreign object in drum	Inspect drum for foreign objects and remove.

Service: For further assistance, contact Kenmore customer support.