Kenmore 2696478100 Dryer Manual

The Kenmore 2696478100 is a high-efficiency dryer designed to provide optimal drying performance for your laundry. It features multiple drying cycles, a moisture sensor, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-efficiency motor, moisture sensor, multiple drying cycles, energy-saving options, and a user-friendly control panel.

Feature	Description
Moisture Sensor	Automatically adjusts drying time based on moisture levels
Multiple Drying Cycles	Options for different fabric types and drying needs
Energy Saver	Reduces energy consumption during operation
Lint Filter	Easy access for cleaning to maintain efficiency
Control Panel	User-friendly interface for easy operation

Installation

Unpack and inspect contents. Place the dryer on a stable surface.

Connect to power: Ensure the dryer is plugged into a suitable outlet.
Ventilation: Connect the vent hose to the back of the dryer.
Level the dryer: Adjust the feet to ensure the dryer is level.
Test operation: Run a short cycle to ensure proper installation.

WARNING! Ensure proper ventilation to avoid overheating.

First-Time Setup

Power on the dryer; follow the control panel prompts.

Select drying cycle: Choose the appropriate cycle for your load.
Adjust settings: Set temperature and drying time as needed.
Start the dryer: Press the start button to begin the drying process.

CAUTION! Ensure the lint filter is clean before each use.

Specifications

Model: Kenmore 2696478100.
Type: Electric Dryer.
Drying Capacity: 7.0 cu. ft.
Power Source: 240V AC.
Dimensions: 27" W x 30" D x 43" H.
Weight: 120 lbs.
Drying Cycles: 10 different cycles available.
Warranty: 1-year limited warranty.

Controls and Settings

Access the control panel for cycle selection, temperature adjustment, and timer settings.

Control Features: Start/Stop button, cycle selector, temperature control, and time adjustment.

Connecting Power

Ensure the dryer is connected to a dedicated electrical outlet.

Turn off power before connecting.
Use a 30-amp circuit for proper operation.
Check for proper grounding.

Tip: Consult a professional electrician if unsure about connections.

Operating the Dryer

Follow the instructions for loading and starting the dryer.

Load clothes: Do not overload the dryer.
Select cycle: Choose the appropriate drying cycle.
Start: Press the start button to begin drying.

WARNING! Do not leave the dryer unattended while in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Inspect the venting system for blockages.
Schedule professional maintenance annually.

Care & Cleaning

Unplug the dryer before cleaning. Use a damp cloth for the exterior.

CAUTION! Avoid using harsh chemicals or abrasive materials.

Regulatory Information

This dryer complies with all applicable safety standards and regulations. For support, visit www.kenmore.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check outlet and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Clothes not drying	Overloading or vent blockage	Reduce load size and check venting.
Unusual noise	Foreign object in drum	Inspect drum for foreign objects.

Reset: Unplug the dryer for 5 minutes to reset.

Service: 1-800-4-KENMORE; www.kenmore.com