Kenmore 110-8676 Series Dryer Manual

The Kenmore 110-8676 Series Dryer is a reliable and efficient appliance designed to handle all your laundry needs. This dryer features multiple drying cycles, an automatic moisture sensor, and a large capacity drum to accommodate various load sizes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple drying cycles, automatic moisture sensor, lint filter, and adjustable drying temperature settings.

Feature	Description
Large Capacity Drum	Accommodates large loads of laundry
Multiple Drying Cycles	Options for different fabric types and drying needs
Automatic Moisture Sensor	Detects moisture levels to prevent over-drying
Lint Filter	Traps lint and debris for efficient drying
Adjustable Temperature Settings	Customize drying temperature for various fabrics

Installation

Ensure proper ventilation and level the dryer for optimal performance.

Unpack and inspect the dryer for any damage.
Connect the dryer to a suitable power source.
Ensure the venting system is properly installed and free of obstructions.
Level the dryer using adjustable legs.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer and select the desired settings.

Plug the dryer into a grounded outlet.
Select the drying cycle based on the load type.
Adjust the temperature settings as needed.
Press the start button to begin the drying process.

CAUTION! Read the user manual for specific settings and recommendations.

Specifications

Model: Kenmore 110-8676 Series.
Dryer Type: Electric.
Capacity: 7.0 cu. ft.
Power Source: 240V AC.
Drying Cycles: 10 different cycles.
Dimensions: 27" W x 29" D x 43" H.
Weight: 120 lbs.

Controls and Settings

Access controls via the front panel. Features include cycle selection, temperature adjustment, and start/pause button.

Control Panel: Cycle selector knob, temperature settings, and indicator lights.

Connecting Power

Ensure the dryer is connected to a dedicated electrical outlet.

Use a 30-amp circuit breaker for safety.
Ensure the power cord is properly connected to the dryer.
Check for any signs of wear on the power cord.

Tip: Always consult a professional for electrical connections.

Operating the Dryer

Follow the instructions for loading and starting the dryer.

Load the dryer evenly to prevent imbalance.
Select the appropriate drying cycle and temperature.
Press the start button to begin the drying process.
Monitor the drying progress through the indicator lights.

WARNING! Do not overload the dryer to ensure efficient operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every load.
Inspect the venting system for blockages.
Schedule professional maintenance annually.

CAUTION! Unplug the dryer before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	No power	Check power supply and connections.
Clothes not drying	Blocked vent	Inspect and clean the venting system.
Excessive noise	Unbalanced load	Redistribute the load evenly.
Dryer overheating	Lint buildup	Clean the lint filter and vent.

Reset: Unplug for 5 minutes and plug back in to reset.

Service: Contact Kenmore customer service for assistance.